Autoglym - Polar Wash

Easy to spray on and gentle on your car’s curves; our Polar Wash high foaming shampoo is designed for a minimal effort, yet extremely effective car washing session.

You’ve completed the pre-wash, now onto the agitation stage. Our Polar Wash, with its high foaming action, picks up where the Polar Blast left off - cutting through traffic film as you agitate. This shampoo makes removing dirt quick and easy, leading you onto the final stage – Polar Seal – in no time.

1. Before you start, check that the bodywork and wheels are cool to the touch and out of direct sunlight.
2. We recommend a pre-wash with Polar Blast to gently loosen dirt. If not, rinse first with water to loosen heavy contamination.
3. Polar Wash can be used at various dilutions depending on the density of foam desired. However, we would not recommend using a dilution stronger than 50:50. Adjust foam gun settings as required to increase or reduce foam. 250ml of mixed solution should be enough to cover an average sized car.  
4. Spray Polar Wash onto the vehicle, starting at the bottom, ensuring all exterior surfaces are covered, including glass and wheels.
5. The cleaner will begin to loosen dirt on all surfaces. For the most thorough clean we recommend agitating the foam with a sponge or wash mitt.
6. Rinse thoroughly from the bottom up and dry.

Polar Wash is not suitable for use on soft top convertibles.

Top Tip – Follow with Polar Seal for a protective, hydrophobic coating.